Shuttle DS47

Fanless and silent

Passive cooling, no fan noise at all

Perfect to be used in noise-sensitive environments

Fanless, dust-free and thus virtually maintenance-freeLow power consumption

Power consumption: idle: 10-11W, full load: 22-30W (without/with graphics) (measured with 2x 2GB SO-DIMM, 500 GB 2.5" hard disk)24/7 nonstop operation

This device is approved for 24/7 permanent operation.

Requirements:

• Free circulation of air amongst the PC must be guaranteed.
• Ventilation holes must stay clear.
• If a hard disk is installed, this must also be approved for permanent operation by its manufacturerChassis

Slim-PC (Nettop) with black chassis made of steel

Without cooling fan, passive cooling only

The bays for memory, 2.5" drives and Mini-PCIe cards can be easily accessed by removing two cover plates.

• Dimensions: 200 x 165 x 39.5 mm (LWH) = 1.3 litres
• Weight: 1.43 kg net and 2.13 kg gross

Two holes for Kensington Lock and numerous  threaded holes (M3) at both sides of the chassisOperation Position: 1) Device must only be used in vertical position with the DVI port facing up 2) Please make sure to use either the supplied feet or the VESA mountOperation System

This barebone system comes without operating system.

It is compatible with Windows 8, Windows 7, Windows XP and Linux

Supports 32 and 64 bit.Processor

• Model: Intel Celeron 847
• Code name: Sandy Bridge (2nd Gen. Core)
• Cores / Threads: 2 / 2
• Clock rate: 1.1 GHz
• L1/L2/L3 cache: 128 kB / 512 kB / 2048 kB
• Memory controller: DDR3-1066/1333 Dual Channel
• TDP wattage: 17 W maximum, 13.8W typical
• Manufacturing process: 32 nm
• Socket: FCBGA1023

Enhanced SpeedStep technology

Maximum Tjunction Temperature: 100°C

Integrated Intel HD graphics engine

Supports 64 Bit, VT-x with EPT, SpeedStepIntegrated graphics

Intel HD graphics

• Clock rate: 350~800 MHz
• Maximum resolution: 2560 x 1600 (analog), 1920 x 1200 (digital, DVI-D / HDMI)
• Execution Units (EU): 6

Supports two independent screens

Supports DirectX 10.1, Shader 4.1, OpenGL 3.0

HDMI supports HD video plus multi-channel digital audio via a single cableMainboard / Chipset / BIOS

Shuttle Mainboard FS47

All capacitors are high quality solid capacitors

Chipset: Intel® NM70 Express

Supports resume after power failure

Supports Wake on LAN (WOL)

Supports Power on by RTC Alarm

Supports boot from USB devices and SD card reader

AMI BIOS in 8 MByte EEPROM with SPI interface

Supports hardware monitoring and watch dog functionality

Supports Unified Extensible Firmware Interface (UEFI) [1]Power Adapter

External 65 W power adapter (fanless)

• Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
• Output: 19 V DC, max. 3.42 A, max. 65 W
• DC Connector: 5.5/2.5mm (outer/inner diameter)Memory support

2x SO-DIMM slots with 204 pins

Supports DDR3-1066 (PC3-8500) and DDR3-1333 (PC3-10600) SDRAM

DDR3-1600 (PC3-12800) is supported at 1333 MHz clock rate.

Supports Dual Channel mode

Supports max. 8 GB per DIMM,  maximum total size of 16 GB

Supports two unbuffered DIMM modules (no ECC)Mini PCIe Slots

Two Mini PCI Express expansion slots: full size and half size 1) the half size slot is occupied with a WLAN module 2) the full size slot supports PCIe 2.0, SATA 3G and USB 2.0 and can either be used for a Mini-PCIe card or for a Mini SATA (mSATA) flash memory card [3]

Please use the "Mini-PCIE / mSATA Select" function in the BIOS setup.Audio

Audio Realtek® ALC 662 High-Definition Audio (5.1 channel)

Two analog audio connectors (3.5mm) at the back panel:  1) 2 channel line out (head phone) 2) microphone input

Digital multi-channel audio output: via HDMIDual Gigabit LAN Controller

Dual Realtek 8111G Ethernet network controller (Gigabit)

Supports 10 / 100 / 1.000 MBit/s operation

With two RJ45 ports (dual network) supports Teaming [2]

Supports WAKE ON LAN (WOL)

Supports network boot by Preboot eXecution Environment (PXE)Wireless Network (WLAN)

Built-in Mini-PCIe WLAN card (half size) and internal antenna

Supports IEEE 802.11b/g/n, max. 150Mbps up-/downstream

Security: WPA/WPA2(-PSK), WEP 64/128bit, IEEE 802.11x/i2.5" drive bay

Supports one Serial ATA hard disk or one SATA SSD drive in 6.35cm/2.5" format

Device height: 9.5 or 12.5 mm (max.)

Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth

Supports Unified Extensible Firmware Interface (UEFI) [1]

Note: no Serial ATA cable is requiredCard Reader

Integrated SD card reader 

Supports SD, SDHC and SDXC memory flash cards

Supports boot up from SD cardFront Panel connectors 4x USB 2.0 2x RS232 serial ports (5V/12V, 1x switchable to RS422 / RS485)

SD card reader (supports SD, SDHC, SDXC)

Power button

Power LED (blue)

HDD LED (yellow)Back Panel connectors

HDMI 1.3 connector (supports DVI-D with optional adapter)

DVI-I connector (supports VGA with optional adapter) 2x USB 3.0 2x Gigabit LAN (RJ45)

Microphone input

Audio Line-out (headphone)

DC-input connector for external power adapter 4 pin connector (2.54 mm pitch) for power button, Clear CMOS and 5V DC [4]

Perforation for optional Wireless LAN antennas (2 holes)Other onboard connectors

Connector for CMOS battery (with battery)

Fan connector (4 pins) not occupied

LVDS connector (50 pins)

Jumpers for panel voltage and converter voltage selectScope of delivery

Multi-language user guide

Two metal feet

VESA mount for 75/100mm standard (two metal brackets)

Four thumbscrews M3 x 5 mm (screws together VESA mount and PC)

Four screws M4 x 10 mm (to fix the VESA mount to the external device)

Three screws M3 x 4 mm and a rack (to mount a 2.5" storage into the bay)

Driver DVD (Windows 8 / 7 / XP)

External power adapter with power cordEnvironmental Specifications

• Operating temperature range: 0~40 °C [5]
• Relative humidity, non-condensing: 10~90%Conformity/Certifications
• EMI: FCC, CE, BSMI, C-Tick
• Safety: CB, BSMI, ETL, CCC

This device is classed as a technical information equipment (ITE) in class B and is intended for use in  living room and office. The CE-mark approves the  conformity by the EU-guidelines:

• EMV-guideline 89/336/EWG electromagnetic tolerance
• LVD-guideline 73/23/EWG use of electric devices 

within certain voltage-limits[1] Unified Extensible Firmware Interface (UEFI) - required when booting from hard disks larger than 2.2 TB [2] Teaming Mode

The teaming function allows you to group both available network adapters together to function as a single adapter - a method of creating a virtual LAN. The benefit of this approach is that it enables load balancing and failover. [3] mini-SATA (mSATA) not to be confused with the "micro SATA" connector, is a newer industry standard which converts the electrical SATA interface (1.5 or 3.0 Gbit/s) to the pysical "Mini PCI Express" mini card form factor. [4] Four pin header at the back panel

This header allows for connecting an external power button.

It also provides 5V DC voltage for external devices and the Clear CMOS function. [5] Caution: for high ambient temperature over 35°C we strongly recommend to use SSDs (supporting at least 70°C) and rugged SODIMM memory with wide temperature range (up to 95°C)